CE approved. Programs high-density Flash memory devices at near theoretical minimum programming times (Program+verify INTEL28F320W18, 32Mb less than 13.5s ) Standard 48 pin universal pin-drivers come with universal package adapters to support all type of devices in same package with a single adapter. No adapters are needed for DIL devices. Universal pin-drivers are expanded to 100 pins by replacing the standard DIL48 module with PEP18K module. Up to 100 pins universal adapters are available working with PEP18K.Universal adapters ensure rapid algorithm update. Device-specific adapters are also available for devices above 48 pins that are amounted on DIL48 module. Down to 1.5V low voltage devices are supported directly thanks to the DAC controlled I/O levels. Advanced hardware features minimized Bounce noise. Only IC manufacturers approved algorithms are adopted. High yield rates are guaranteed for all devices including low voltage, critical and second-hand devices. ±5% and ±10% Vcc Verification promises programming reliability. Supports 27000+ devices from up to 150 IC manufacturers including MEMORY/MCU/PLD.(Device List) Free life-time software update. SUPERPRO/EZ18K is designed for multi-applications. There are 3 working modes, PC-hosted mode via USB port for R&D, Stand-alone mode for production, Terminal mode for customer application. It comes with a full-featured OS, LCD+ keypad operator interface and a CF card interface for algorithms and user data files storage for stand-alone mode. Pin continuity and wrong chip insertion check prevent chips from accident damage. Over-current and over-voltage protection for programmer hardware. Standard TTL/CMOS logic ICs and user-defined logic ICs can be tested and recognized. Software supports WINDOWS 98/ME/NT/2000/XP. Operator friendly control software combines many powerful functions with ease of use. Project minimizes the whole process of device selection, file loading, device configuration setting, operation option, batch file setting etc. to a single step. History of device selection and file loading simplify operation. Batch command combines device operations like program, verify, security into a single command at any sequence. Auto-Start start Batch command automatically as soon as the chip is detected to be inserted in the socket properly. Serial number can be generated and programmed into devices automatically in anyway customer specified. The correct device type will be suggested according to the actual ID read when a mistake type is selected. With help of the open API user can even change the buffer content from chip to chip. Recognizes file formats and detects large file offset automatically. SUPERPRO/EZ18K announces clustering programming system. a characteristic volume production solution. Several units work together in stand-alone mode like a multi-site production programmer. Advantages over traditional gang programming:
o No special gang adapter and s/w are needed. Supports more devices and algorithms update more quickly.
o Meets budget flexibly. Starts with a single unit, then, add more to increase throughput with business growing.
o Safer for the production chain because a single unit faulty will not stop whole production.
o Higher throughput. Each unit starts working as soon as a new chip is inserted, No need for synchronous start of all the units.
EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration Serial PROM, FLASH Memory(NOR and NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB,Microcontroller, MCU, Standard Logic.
CE approved.